UPGRADES for the INTERCEPTOR400

CHOPPERADDICT SPECIALISES IN THE BUILDING, REPAIRING & 
SETTING UP OF R/C HELICOPTERS AND RADIOS

   

                  
Many people have asked if it is possible to get CNC upgrades for the Interceptor 400, and up until now the answer has been no unless you wanted to try to fit non Interceptor parts such as Trex or CopterX heads and tails.  However, I am pleased to say that I can now offer a full range of genuine CNC upgrade parts made specifically for the Interceptor 400 design, plus CCPM conversions that are specifically designed for the ever more popular INT400 helicopter

All Genuine INT400 Upgrade parts come in the red anodised colour shown below & are directly interchangeable with the standard plastic parts.

Other manufacturer parts that can be used on the INT400 are usually in the colours shown..

PLEASE enter the total quantity of each item that you wish to order 
and then complete your personal details at the bottom of the form 
THANK YOU 
      

FULL ASSEMBLIES

    
INT251
£34.00		 Complete INT400 CNC Rotor Head assembly with control rods etc. Available with 90 degree or 120 degree swash plate
£38.00 Complete CopterX CNC Rotor Head assembly with control rods etc with 120 degree CCPM swash plate

The swash plate needs to be changed to a 90 degree unless you have the INT400 CCPM conversion
INT246
£21.25		 Complete INT400 CNC tail assembly (Drive belt not included + you need to upgrade to INT218 tail surfaces as well)

£11.25		 Complete CopterX CNC tail assembly c/w Drive belt)

£42.50		 Complete CopterX CNC Head + tail assembly 
c/w Drive belt

The swash plate needs to be changed to a 90 degree unless you have the INT400 CCPM conversion

HEAD PARTS

    

INT202
£11.15		 CNC Swash plate for CCPM version or any 450 size CCPM helicopter 
(120 degree swash)

INT201
£ 10.25		 CNC Swash plate for Standard INT400 
(90 degree swash)
INT230
£14.00		 CNC complete Washout Control set c/w bearings
INT231
£14.95		 CNC main rotor blade grips with connector balls
INT219
£19.00		 CNC Full rotor head mixer set c/w bearings etc
INT243
£ 2.65		 CNC stabiliser blade mounts c/w grub screws
INT221
£ 4.95		 CNC slide block for washout arms
INT222
£ 6.25		 CNC Seesaw arm c/w bearings and mixer arm screws
(Highly recommended upgrade)
INT225
£ 10.00		 CNC Washout control arm c/w bearings & screws
INT224
£ 8.95		 CNC mixing arms c/w bearings, bushes & screws
INT223
£ 6.75		 CNC stabiliser control arm c/w bearings

TAIL/BOOM PARTS

    
INT240
£14.50		 CNC Tail Pitch plate set c/w bearings & screws
INT245
£14.95		 CNC Tail pitch set-Pro
INT218
£12.75		 Carbon Fibre stabilisers (with spacers needed to mount to upgraded tail)
INT215
£ 8.00		 Carbon fibre  boom - 345mm (This is longer than the normal boom, & needs a longer Trex 450 drive belt)
£ 5.75 Longer drive belt needed with upgraded boom
INT239
£ 8.95		 CNC Tail pitch plate
INT228
£ 5.25		 CNC Horizontal stabiliser mount
INT238
£ 5.25		 CNC Servo mounting brackets for rudder servo

INT204
£19.50		 CNC Tail unit case set c/w drive shaft etc
INT232
£ 7.95		 CNC Tail blade holder c/w bearings etc

FRAME PARTS

    
INT233
£ 9.00		 CNC Main shaft bearing housings c/w bearings & screws
INT226
£ 7.00		 CNC Elevator control arm
INT205
£25.00		 CCPM conversion kit with CNC 120 degree swash plate and head connecting rods
INT227
£ 4.75		 CNC Elevator control lever arm
(Highly recommended upgrade)
INT234
£ 7.75		 CNC Tail driven gear mounting set c/w bearings & screws
INT229
£ 5.25		 CNC boom support set
INT235
£ 7.00		 CNC Boom supports c/w screws 

BLADES

  
INT214
£11.00		 Carbon Fibre Tail Blades
INT212
£23.00		 Carbon Fibre Main  Blades - 325mm c/w spacer washers. (longer carbon upgrade boom is needed to use these)
INT213
£18.50		 Carbon Fibre Flybar Blades
 
Full Name *
Email address *
Address line 1 *
Address line 2  
Town *
County *
Postcode *
Payment method

*
Comments

PLEASE ENSURE that you have completed ALL the fields marked with asterisks
otherwise your order will be discarded...

CLICK HERE FOR MY BANK DETAILS IF YOU ARE PAYING BY DIRECT BANK TRANSFER

       

 

THIS SITE IS MOSTLY NON COMMERCIAL AND IS FUNDED BY DONATIONS OF ALL TYPES FROM OTHERS IN THE RC HELICOPTER FRATERNITY.  MY THANKS GO OUT TO ALL WHO CONTRIBUTE WITH IDEAS, INFORMATION, HELI PARTS OR EVEN CASH DONATIONS TO HELP WITH THE COSTS OF HOSTING THE SITE