
Sponsored in part by

|
Purchasing from this page will give
you
A HAND BUILT
HELICOPTER THAT YOU KNOW IS BUILT &
SETUP
CORRECTLY AND HAS BEEN FLOWN BY ME
PERSONALLY TO CONFIRM
IT IS READY FOR YOU TO LEARN TO FLY WITH
SAFELY AND SUCCESSFULLY
 |
DEAL 3 - The Interceptor
400
(Without the Alien Command Auto
Pilot)
CLICK
HERE
FOR INTERCEPTOR 400 WITH
THE ALIEN COMMAND AUTO PILOT FITTED
|
This is the mid range deal I offer,
which provides an excellent value for
money way to get into flying RC
helicopters.
This helicopter is one that you will
not grow out of, but will still want to keep flying it
long after you have learned how to
fly...
|
Why buy from a big dealer (Box shifter)
when you can
buy it and have
it built properly by a long standing builder and helicopter pilot such as myself
I
am a BMFA member, and offer FULL
ongoing support to all
helicopter clients
Here is what one customer said recently:
Hi Ian
Just thought I would drop you a note to let you know
how delighted I am with the Int.400 you recently
supplied. I was very impressed with the build quality
and set up out of the box.. I flew it this afternoon
for 3 packs and drove home smiling! I had to turn down
the gain on the Alien by fully clockwise - 20% as it
was being affected by some tarmac at my fly site. My
tx is actually a DX7 (not a DX6) but I used the
settings you emailed to me all the same. I only had to
adjust the gain setting on the tx gyro.
Thanks again from a very satisfied customer.
Rgds
Doug Green
|
The
price below includes the following items
:
1 off
Interceptor 400 helicopter complete. This
helicopter has a very strong but
lightweight aluminium
frame for additional strength. When
configured correctly, it is fully capable
of all aerobatics including what we call
full 3D manoeuvres.
Included
items
1 off Interceptor 400
Combo kit
1 off 3100 KV brushless motor
1 off 2200 Mah 25C
Lipo battery
4 off ACER-LAB A8-SG servos
1 Pair wood main rotor blades
1 Pair nylon tail blades
1 off Acer Labs 40 Amp Electronic Speed
Controller (ESC) with programming
card
Interceptor 400 WITHOUT Alien
Command as detailed above - £147.00
The following will be required unless you
already have them :
Gyro
I suggest the following item, which is the one normally fitted to the
INT400
1 off
Acer Labs G1000 Gyro (+£29 - you may
choose a different gyro if you wish)
If you want a really GOOD gyro, I can supply the well
known
Futaba GY401 AVCS SMM gyro for only £90.00
These usually sell for £120+
NB - Without a gyro, I
will not be able to test fly this
helicopter.
TOTAL
COST for Interceptor 400 with G1000
gyro - Ready built, setup & flight
tested - £176.00
BUILD FEE - £40
TOTAL COST - £216
Additional optional
items
1 off
set of training legs + £12.00
1 off Esky Lipo battery charger with 240v transformer +
£22.00 4 off Acer
Labs D12MG metal geared servos (stronger
than the standard servos) + £34
1 off Aluminium style case
with foam insert to fit 450 size heli,
discrete Helivol Logo on outside +
£42
1 off Radiolink TH6P 6 channel 2.4 GHz
Radio + Radio Receiver.
+
£76.50
1 off Spektrum DX6i 2.4 GHz
Radio + AR6100 or AR6200 Radio Receiver.
+
£135 1 off
Spektrum DX7 2.4 GHz Radio + AR7000 Radio
Receiver. +
£255 1 off 2200MAh 25C lipo +
£24
 |
If
you want a better (painted fibreglass) canopy at only
£8.50
PLEASE CLICK HERE
and order separately |
If you want to use even
larger or more powerful Lipos, you can go
up to the RapidCharge 2200Mah 25C at
+£19.00 or even more powerful RapidCharge
2200MAh 35C at
+£26.00.
NB - Using these larger
RapidCharge lipo batteries means the
standard Interceptor canopy can NOT be
used, you will need to obtain a Trex 450
or CopterX style Canopy of your own
choosing (such as those shown above) to use either of these lipos.
Then the lipo can be mounted normally or under the main frame
at the front.
Providing you purchase a gyro, the
helicopter will be fully built correctly,
then correctly setup to ensure it will
fly as best as possible and it will then
be test flown to ensure that the gyro is
setup, & the pitch range will be set
to be optimal for a learner
pilot.
If you
purchase a radio system, it will be
preconfigured for you, and setup to make
it as easy as possible to fly when
learning.
TOTAL
COST
£2 16.00
(Fully built
& flight tested, but without any
radio system)
If you
feel that you want any special parts,
such as an improved ESC or better tail
gyro, or indeed anything else, I can both
supply and fit these parts for you at no
additional labour charge if specified
when the helicopter is
ordered. Their original cost
will be deducted and the cost of the
requested items added.
Doing
so will NOT INVOLVE ANY EXTRA CHARGE AT
ALL other than the additional cost of the
other parts you want me to fit.
|
|
Included in this price are all of the
following extra CHOPPERADDICT
benefits.
1 - I
will provide you with FREE and unlimited
ongoing support, which includes totally
labour free repairs and I can also provide low cost
rebuild/setups if you
are unlucky enough to crash it. All you
will have to pay for a repair (only) is the parts
required + P&P, and of course
shipping of the helicopter in both
directions, which is typically around
£10-£12 each way. If you want the helicopter
fully setup to suit your level of proficiency and then
test flown, add £20 for this. I can also
provide full radio setups of computerised radios such
as Spektrum, Futaba & others to suite your level
of proficiency for an additional £20.
2 - I
will offer you totally FREE, 1-on-1
flight training using the Phoenix flight
simulator to help you get
started.
3 - If
you really want to learn all about your
helicopter and how to set it up and
repair it properly, I can offer you a
full days "Master Class" alone with me in
my "hanger" here in Blackpool, during
which time I will show you everything you
want to know about building, repairing
and setting up helicopters. I do
make a small charge of £75 per day for
this training which includes a sandwich
lunch and of course
tea/coffee.
4 - If
you really want to learn to hover your
helicopter as rapidly as possible, I can
offer you a full days "Master Class"
alone with me here in Blackpool, during
which time I will check the set up of
your helicopter, and then we go off out
to one of the various flying site I have
available and get you hovering. If
you have the stock Esky radio system, I
do have a trainer lead that we can use so
I can recover your heli if you happen to
do something really dumb....
To place an order for DEAL 3,
please use the form below.

Why not check me out on Facebook ?
THIS SITE IS TOTALLY NON
COMMERCIAL AND IS FUNDED BY DONATIONS
OF ALL TYPES FROM OTHERS IN THE RC
HELICOPTER FRATERNITY. MY THANKS
GO OUT TO ALL WHO CONTRIBUTE WITH
IDEAS, INFORMATION, HELI PARTS OR EVEN
CASH DONATIONS TO HELP WITH THE COSTS
OF HOSTING THE SITE
| OUR COMMERCIAL
SPONSORS |
NetCPlus Internet Solutions,
Inc
Helping with the cost
of hosting this web
site |
|
|