SPECIAL DEALS
Fully built, setup & tested helicopter for those 
who want to learn to fly RC helicopters.

CHOPPERADDICT SPECIALISES IN THE BUILDING, REPAIRING & 
SETTING UP OF R/C HELICOPTERS AND RADIOS

   
[verticalmenu-store.html]

                  
THIS IS THE ONE OF THE FEW PLACES ON THIS WEB SITE 
WHERE YOU CAN ACTUALLY BUY SOMETHING DIRECTLY FROM ME

If you happen to do so

YOU WILL END UP WITH A HAND BUILT HELICOPTER THAT YOU KNOW IS BUILT & SETUP 
CORRECTLY AND HAS BEEN FLOWN BY ME PERSONALLY TO CONFIRM 
IT IS READY FOR YOU TO LEARN TO FLY WITH SAFELY AND SUCCESSFULLY

DEAL 2 - Esky Belt CP v2 
(with Alien Command Advanced)

This is a deal based on the cheapest option of an Esky Belt CP, but this one has a fully fitted and tested auto pilot using the Alien Command system.  This is a very good value for money way to get into flying RC helicopters safely with the back up of alien Command to help you.

Why buy from a big dealer when you can buy it and have it built properly 
by an expert builder and helicopter pilot such as myself

I am a BMFA member, and offer ongoing support to all helicopter clients

Here is what one customer said recently:

Hi Ian
 
Just thought I would drop you a note to let you know how delighted I am with the Int.400 you recently supplied. I was very impressed with the build quality and set up out of the box.. I flew it this afternoon for 3 packs and drove home smiling! I had to turn down the gain on the Alien by fully clockwise - 20% as it was being affected by some tarmac at my fly site. My tx is actually a DX7 (not a DX6) but I used the settings you emailed to me all the same. I only had to adjust the gain setting on the tx gyro.
 
Thanks again from a very satisfied customer.
 
Rgds
 
Doug Green
      

The price below includes the following items :

1 off Esky Belt CP v2 helicopter complete with 3800 KV Esky motor, Esky servos, Esky rotor and tail blades, the Esky 25 Amp Electronic Speed Controller (ESC) & Esky Heading Hold gyro. This is a plastic frame and has wooden main blades This is the most basic Belt CP, but it can be upgraded at any time with different and better rotor heads, tail gearboxes, motors, ESC's etc etc.

1 off standard Esky Radio transmitter and receiver (35Mhz) that is *not* user configurable to any real extent.

1 off set of Esky training legs.

1 off Esky 11.1v 1800Mah Lipo battery 

1 off Esky Lipo battery charger c/w 240V transformer.

1 off Alien Command Advanced - fitted, configured & tested.

The helicopter will be checked and then rebuilt correctly, and finally fully setup to ensure it will fly as best as possible and it will be test flown to ensure that the gyro is setup, & the pitch range will be set to be optimal for a learner pilot.

Once it is flying correctly on it's own, it comes back into the hanger to have the Alien Command Auto Pilot system fitted. This is setup and the helicopter is flown again, with the Alien Command switched on & off to ensure it is flying correctly in both modes.

TOTAL COST - £330 + Shipping
(includes full set up + Test flights, plus my personal ongoing support)

I can also supply you with the Carbon Fibre framed version for £400 + Shipping if preferred.

If you would like to have a really good radio system straight off, I can provide the following options :

1 off Spektrum DX6i 2.4 GHz Radio Transmitter and AR6100 or AR6200 Radio Receiver. + £135
or
1 off Spektrum DX7 2.4 GHz Radio Transmitter and AR7000 Radio Receiver. + £255

I can also provide other radio systems on request
(I can allow you £15 discount if I keep the original Esky Radio against either of the above radios)

Add £29.00 for the recommended Acer Labs G1000 Gyro 
Or add the price of your preferred gyro

Add £17 for Esky 2.4Ghz radio system

If you feel that you want any other special parts, such as better rotor blades, an upgraded rotor head or tail, improved ESC or better tail gyro, or indeed anything else, I can both supply and fit these parts for you.  

Doing so will NOT INVOLVE ANY EXTRA CHARGE AT ALL other than the cost of the other parts you want me to fit.
              

Included in this price are all of the following extra CHOPPERADDICT benefits.

1 - I will provide you with FREE and unlimited ongoing support, which includes Low Cost repairs and rebuilds if you are unlucky enough to crash it. 

2 - I will offer you totally FREE, 1-on-1 flight training using the Phoenix flight simulator to help you get started. 

3 - If you really want to learn all about your helicopter and how to set it up and repair it properly, I can offer you a full days "Master Class" alone with me in my "hanger" here in Blackpool, during which time I will show you everything you want to know about building, repairing and setting up helicopters.  I do make a small charge of £75 per day for this training, which includes a sandwich lunch and of course tea/coffee.

4 - If you really want to learn to hover your helicopter as rapidly as possible, I can offer you a full days "Master Class" alone with me here in Blackpool, during which time I will check the setup of your helicopter, and then we go off out to one of the various flying site I have available and get you hovering. If you have the stock Esky radio system, I do have a trainer lead that we can use so I can recover your heli if you happen to do something really dumb....

I do make a small charge of £75 per day for this training, which includes a sandwich lunch and of course tea/coffee.


 


THIS SITE IS MOSTLY NON COMMERCIAL AND IS FUNDED BY DONATIONS OF ALL TYPES FROM OTHERS IN THE RC HELICOPTER FRATERNITY.  MY THANKS GO OUT TO ALL WHO CONTRIBUTE WITH IDEAS, INFORMATION, HELI PARTS OR EVEN CASH DONATIONS TO HELP WITH THE COSTS OF HOSTING & MAINTAINING THE SITE