|
DEAL 1
- The Esky Belt CP v2 |
This is the most basic deal I offer, but is a very good
value for money way to get into flying RC helicopters.
NB - This version does NOT have the Alien Command auto pilot
system fitted
|
Why buy from a big dealer when you can
buy it and have it built properly
by an expert builder and helicopter pilot such as myself
I
am a BMFA member, and offer ongoing support to all helicopter
clients
Here is what one customer said recently:
Hi Ian
Just thought I would drop you a note to let you know
how delighted I am with the Int.400 you recently
supplied. I was very impressed with the build quality
and set up out of the box.. I flew it this afternoon
for 3 packs and drove home smiling! I had to turn down
the gain on the Alien by fully clockwise - 20% as it
was being affected by some tarmac at my fly site. My
tx is actually a DX7 (not a DX6) but I used the
settings you emailed to me all the same. I only had to
adjust the gain setting on the tx gyro.
Thanks again from a very satisfied customer.
Rgds
Doug Green
|
The price below includes the following items :
1 off Esky Belt CP v2 helicopter complete with 3800 KV Esky
motor, Esky servos, Esky rotor and tail blades, the Esky 25 Amp
Electronic Speed Controller (ESC) & Esky Heading Hold gyro. This is the plastic framed
version and
has wooden main blades This is the most basic Belt CP, but it can be
upgraded at any time with different and better rotor heads, tail
gearboxes, motors, ESC's etc etc.
1 off standard Esky Radio transmitter and receiver that is
*not* user configurable to any real extent.
1 off set of Esky training legs.
1 off Esky 11.1v 1800Mah Lipo battery
1 off Esky Lipo battery charger c/w 240V transformer.
The helicopter will be checked and rebuilt correctly where
necessary, then
fully setup to ensure it will fly as best as possible and it will be
test flown to ensure that the gyro is setup, & the pitch range
will be set to be optimal for a learner pilot.
TOTAL COST - £169.95 + Shipping
(includes
full set up + Test flights, plus my personal ongoing support)
I can also supply you with the Carbon Fibre framed version
for an additional £95 if preferred.
If you would
like to have a really good radio system straight off, I can provide
the following options :
1 off Spektrum DX6i 2.4 GHz Radio Transmitter and AR6100 or
AR6200 Radio Receiver. + £135
or
1 off Spektrum DX7 2.4 GHz Radio Transmitter and AR7000 Radio Receiver.
+ £255
I
can also provide other radio systems on request
(I can allow you £15 discount if I keep the original Esky Radio
against either of the above radios)
Add £29.00 for the recommended
Acer Labs G1000 Gyro
Or add the price of your preferred gyro
If you feel that you want any special parts, such as better
rotor blades, an upgraded rotor head or tail, improved ESC or better
tail gyro, or indeed anything else, I can both supply and fit these
parts for you.
I can also supply you with the Carbon Fibre framed version
for £260 + Shipping if preferred.
Doing so will NOT INVOLVE ANY EXTRA CHARGE AT ALL other
than the cost of the other parts you want me to fit.
|
