|
Pages :-
1 2
3 4 5 6 7
8
9
10
11
12 13
14
15
16
17 18
PREVIOUS
PAGE
Fitting the Canopy
This is very simple, and doesn't need
covering in any real detail.
Tips here are to take your time cutting parts
away, as you cannot add them back on again afterwards.
Use the small screws that are supplied to fit the
clear glazed canopy glass to the canopy, but make sure you trim them
down on the inside so that they cannot foul anything, or indeed
catch your fingers later on.
When applying the transfers, cut them as close to
the colours as you possibly can or they will not bend around some of
the curves properly
THIS
SITE IS MOSTLY NON COMMERCIAL AND IS FUNDED BY DONATIONS OF ALL TYPES
FROM OTHERS IN THE RC HELICOPTER FRATERNITY. MY THANKS GO OUT TO
ALL WHO CONTRIBUTE WITH IDEAS, INFORMATION, HELI PARTS OR EVEN CASH DONATIONS TO
HELP WITH THE COSTS OF HOSTING THE SITE
| OUR COMMERCIAL SPONSORS |
 NetCPlus Internet Solutions,
Inc
Helping with the cost
of hosting this web site |
| 
