ChopperAddicts Radio Controlled Helicopters Web Site

The ChopperAddict RC Helicopter
(and useful spare parts) SHOP

This is the ChopperAddict shop. All items are BRAND NEW BOXED ITEMS sourced from the main wholesaler(s) here in the UK, THEY ARE NOT Far Eastern copies bought on E-Bay or elsewhere.

I try very hard to pass on the lowest possible prices to you, the helicopter fraternity, and I also provide you with a full PERSONAL AFTER SALES SERVICE including setup help etc.

NB - I do not sell any of these items to make a living, so the pretty small profits I make from these sales are used solely to fund this web site, so please use my shop, as by doing so you are helping to keep this site going so it can continue to provide special deals like these, and continue helping many other RC helicopter pilots as well with items like the FREE heli-Hospital, and free setup service.

To allow me to keep my prices as low as possible,
PLEASE NOTE THAT ALL ORDERS MUST BE FOR £30 or more
unless a single item is £27 or more

To order, just enter the quantity of each item you require, and complete the details at the bottom.

QUICK LINKS - just click on icons
Interceptor 400 kits	TOTALLY FREE Services
Interceptor 400 kits fitted with Alien Command	Alien Command Fitting Service
Alien Command systems	Kit building services
Spare parts & Accessories	SPECIAL OFFERS

INTERCEPTOR 400 HELICOPTER

I can provide this great helicopter in various different forms to suit your needs and pocket.

This helicopter is great for learning to fly, but is also exceptionally capable as a 3D aerobatic helicopter for later on, it just depends on how you set it up. This really is the Best of Both Worlds - for the really low cost of this single helicopter.

NB - Basic prices do NOT include any radio equipment, which allows you to choose the best radio to suit your needs and pocket. Equally, because the Interceptor uses mCCPM rather than eCCPM (mechanical rather than electronic mixing), you do not need to pay for a really a fancy radio to fly it.

ALL PRICES SHOWN are INCLUSIVE, but exclude P&P

Check out my special ALL IN DEALS for Interceptor 400's
DEAL 3 From £205 without Alien Command	DEAL 4 From £279 with Alien command
NB - The special DEALS above are literally RTF as I build each of them personally to suit your particular requirements
IMPORTANT You may think that my prices are significantly higher than the costs advertised elsewhere - this is the reason :- NB - The basic INT400 kits and combo kits shown below require full assembly by you. The "Assembled" kits are not even close to ARTF - They still leave you to fit the head assembly, main gear assembly, boom and tail drive assembly, cut out and finish the canopy, and assemble and fit the skids. Even in the case of basic kit or the Combos, you still have to mount the motor and ESC, fit the servos and of course radio.

INTERCEPTOR KITS

My
BEST Prices

Clcik here to read all about the Interceptor 400 Helicopter

Qty

1 - Interceptor 400 kit
You need to build it entirely
(You need to add motor, servos, ESC, gyro and Lipo)

£65.00

	Qty		2 - Interceptor 400 kit (Assembled) These are only part built into larger sub assemblies. and there is still quite a bit for you to do, plus you have to fit your own servos, motor, gyro etc (You will need to add motor, servos, ESC, gyro and Lipo of your choice)	£82.50

	Qty		3 - Interceptor 400 Combo kit You need to assemble it entirely The Combo comes with an Acer Labs 3100KV brushless motor, 4 Acer Lab servos and Acer Labs 40A ESC c/w programming card. Just add gyro of your choice, Lipo and radio.	£145.00

	Qty		4 - Interceptor 400 Combo (Assembled) These are only part built into larger sub assemblies. and there is still quite a bit for you to do, plus you have to fit the servos, motor, gyro etc. Combo includes Acer Labs 3100KV brushless motor, 4 Acer Lab servos and Acer Labs 40A ESC c/w programming card. Just add gyro of your choice, Lipo and radio.	£185.00

INTERCEPTOR 400 HELICOPTER kits with Alien Command
	Qty		5 - Interceptor 400 kit with Alien Command (Standard) You need to build it fully (You need to add motor, servos, ESC, gyro and lipo)	£122.50

	Qty		6 - Interceptor 400 Combo kit with Alien Command (Standard) You need to build it fully Includes Acer Labs 3100KV brushless motor, 4 Acer Lab servos and Acer Labs 40A ESC c/w programming card, and the standard version of Alien Command.	£211.00

	Qty		7 - Interceptor 400 kit with Alien Command (Standard) Assembled Helicopter is partially assembled but still requires quite a bit of further work. (You need to add motor, servos, ESC, gyro and lipo)	£140.00

	Qty		8 - Interceptor 400 Combo (built) with Alien Command (Standard) Assembled Helicopter is partially assembled but still requires quite a bit of further work. Includes Acer Labs 3100KV brushless motor, 4 Acer Lab servos and Acer Labs 40A ESC c/w programming card, and the standard version of Alien Command. Just add gyro of your choice, Lipo and radio.	£215.00
ALIEN COMMAND Auto Pilot system Alien Command is a well established Auto Stabilisation system that has been around for several years now and is very well proven. Basically, Once setup, it will recover your helicopter to a level hover if you just let the cyclic stick go for more than a fraction of a second. This makes hovering a doddle, as all you need to do is handle the throttle and tail. Equally, If you get into trouble (& don't we all sometime), just let go of the cyclic stick and let Alien Command recover your helicopter to a level hover, from where you can take control back and land it safely. Let's be honest, it will pay for itself with the savings from not having to repair just one major crash, and you are able to fly more often, and in windier conditions that you might be able to fly otherwise. There are two versions of the Alien Command auto pilot system, and you need to understand which one you need for your helicopter. If your helicopter has a 90 degree swash plate system, and you are NOT using digital servos, you can use the STANDARD VERSION. eg: Interceptor 400 and others that have a mechanical swash plate mixing system, and are using analog servos. If your helicopter has a 120 degree swash plate system, OR you are using digital servos, you MUST use the ADVANCED VERSION. eg: Esky Belt CP and others that have electronic CCPM swash plate mixing system, or any helicopter that is using digital servos. READ MORE about the ALIEN COMMAND SYSTEM

	Qty		Alien Command Standard	£57.00

	Qty		Alien Command Advanced	£117.50
SPECIAL SERVICES All of the following services are available for any type of helicopter, so it does not matter if you have an Esky Belt CP, an Interceptor 400, Trex 250, 450 etc, or CopterX or other Trex clone.
FREE HELICOPTER MECHANICAL SET UPS & REPAIRS NO CHARGE AT ALL FOR MY TIME - YOU JUST PAY FOR PARTS + p&p Read More about these FREE services
			Send your Heli to me and I will do a full mechanical setup of your heli to ensure it is setup correctly to fly properly, test fly it and return the heli to you. FREE + P&P Email me for more information or to book your heli in.

			Send your Heli to me after a crash and I will repair it and do a full mechanical setup to ensure it is setup correctly to fly properly, test fly it and return the heli to you. FREE + cost of parts needed + P&P Email me for more information or to book your heli in.

SUPPLY AND FIT THE CORRECT ALIEN COMMAND AUTO PILOT TO YOUR HELICOPTER Read More about Alien Command
			Send your Heli to me and I will fit the CORRECT version of the Alien Command system to it, set it all up, and return the heli to you Cost of Alien Command as above + £20 + P&P Email me for more information or to book your heli in.

			As above, but I will also do a full mechanical setup of your heli to ensure it is setup correctly to fly properly. Cost of Alien Command as above +£30 + P&P Email me for more information or to book your heli in.

BUILDING YOUR OWN HELICOPTER KITS FOR YOU
			Send your new helicopter kit to me complete with all the parts you have and I will build it for you, plus I will do a full mechanical setup, set up your radio and finally test fly it to ensure it is setup correctly and flying properly. Cost of any other parts required +£50 + P&P Email me for more information or to book your heli in.

			Send your new helicopter kit to me complete with all parts and I will build it for you, plus I will do a full mechanical setup of your heli, and set up your radio and finally test fly it to ensure it is setup correctly and flying properly. THEN I will fit the correct type of Alien Command Auto Pilot System and set it all up and test fly it again. Cost of relevant AC unit + any other parts required +£80 + P&P Email me for more information or to book your heli in.

"Master Classes" on repairing and setting up your helicopter
			Many people want to be able to build, rebuild or modify their helicopters, but do not have a clue how to do so. This is quite understandable. My full day classes let you bring your OWN helicopter to me, and I will repair it and/or go through a full mechanical setup with you alongside me. You can of course ask me any questions you want, and I will also set up your radio if needed. The final part of the day usually results in a test flight session of your helicopter. £25 per day (10:30 - 4:30, includes sandwich lunch and coffee(s)) Email me for more information or to book yourself in.
PARTS & ACCESSORIES (Most parts fit most helicopters) I STOCK MANY INTERCEPTOR 400 and Belt CP PARTS and can obtain most other parts required, typically within 24 hours.

	qty		E-Sky standard (woodie) blades as a pack of 6 pairs, each pair of blades will be balanced by me personally and so will be ready to fit to your Belt CP immediately.	£33.50 6 pairs of blades
	qty		Interceptor 400 main gear WITH One way bearing. Fits Interceptor 400 AND Esky Belt CP with no modification required and is made from a MUCH STRONGER nylon material. Just press the bearing up 1mm to fit it to a Belt CP. This is the identical main gear to those from MicroHeli and Heliguy	£5.95

	Qty		Acer Labs G1000 Heading Hold/rate Gyro Great low cost gyro for most 400-450 size helicopters WHY PAY MORE FOR A DECENT GYRO... Supports both analog and digital servos Dimensions (mm): 282820 Operating voltage: 4.8V ~ 6V Operating temperature: -10°c ~ +45°c Operating current: 80mA	£27.00

	Qty		Acer Labs 40A Electronic Speed controller (ESC) without programming card - great for ANY HELI - this is the original, and Sonix and various other ESC's are in fact clones under a different badge and covering. Forget worrying about the "magic smoke" from the Esky ESC and fit your helicopter with one of these. Output: Continuous 40A, Burst 55A for up to 10 Secs. Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery. BEC: 3A / 5V (Switch mode). Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. Size: 55mm (L) * 28mm (W) * 12mm (H). Weight: 35g.	£29.50

	Qty		Acer Labs 40A Electronic Speed controller (ESC) WITH programming card. Can be used on most helicopters.	£36.00

	Qty		Acer Labs 3100KV brushless motor, designed for the Interceptor 400, not for use with Belt CP. 3100KV 62.5g	£19.00

	Qty		Acer Labs 8G servo Great Low Cost Servo for most 400-450 size helicopters Operating Speed: 0.11sec/60deg @ 4.7V 0.08/60deg @ 6.0V Output Torque: 1kg/cm @ 4.8V 1.3kg/cm @ 6.0V Dimensions: 22.811.624mm Weight: 8g	£15.75 for 3 servos only sold in threes or more

	Qty		Acer Labs AL-D12-MG Digital Servo with metal gears Great value for most 400-450 size helicopters Operating Voltage Range: 4.5V-6.0V Operating Temp Range: -20c - 60c Operating Speed: .07sec @ 6.0V, .09sec @ 4.8V Torque: 1.8kg.cm @6V, 1.6kg.cm @ 4.8V Running Current Range: 50-180mA Idle Current: 5mA Dead Bandwidth: <3usec Weight: 12g Gear Material: Metal	£33.00 for 3 servos only sold in threes or more

	Qty		Acer Labs 3100KV Motor Combo and AL-EMC 40A ESC WITH programming card. Motor is designed for the Interceptor 400, not suitable for Belt CP.	£55.50

	Qty		Acer Labs (+ Sonix + various other makes) ESC programming card	£6.00

	Qty		"Y" leads - required for Alien Command on helis with 120 degree CCPM type swash plates to let you control the pitch servo as well as the throttle from the throttle connection on the RX (std Futaba connectors) These are 26mm to the join and 26mm each Y piece, totalling 52mm long and really useful for all sorts of applications where you want to split a channel.	£3.50

	Qty		Helivol heli builders tool kit Includes: Pitch Gauge Wire Cutters Pliers Ball Link Pliers 4.0mm Socket Driver 5.5mm Socket Driver 1.5mm Hex Driver x 2 2.0mm Hex Driver 2.5mm Hex Driver Phillips Driver x 2 Flat Head Driver	£32.00

	Qty		Main rotor blade balancer This is a high quality CF Blade Balancer with CNC fittings and excellent bearings. A great accessory to every tool box. Ensure your blades are perfectly balanced every time.	£12.00

	Qty		Deans connectors with heat shrink 10 x Male 10 x Female 20 x Shrink Wrap	£5.50

	Qty		RP4S RapidPro 4S charger Charge 3S lipos or up to a 4S 4000Mah lipo in 50 minutes using 2C rate, Adjustable charging from 0.25A to 4A. Fast auto charge system chooses optimal charging rate if you want it to do so.	£40.00

	Qty		RapidPro 4S charger - lipo connector board	£3.25

	Qty		RapidPro 4S charger transformer for using it from the mains	£11.50

	Qty		Alloy case suitable for any 450 sized RC helicopter. They have a pre-cut high density foam interior to cushion the helicopter. Exterior is an aluminium frame. It features a discrete Helivol logo.	£40.00

	Qty		As above for 500 size helicopters. This has 4 catches.	£72.50

	Qty		As above for 600 size helicopters. This has 6 catches and it has coasters on one end for wheeling the case along	£115.00

	Qty		As above for 250 size helicopters, Will take helicopter and Radio.	£32.50

SPECIAL OFFERS - UNWANTED ITEMS as per the description
		4 off BRAND NEW Spektrum DS821 DIGITAL Servos suitable for .30/.40 nitro helis (4 screw fitting). These came with a DX7 radio system for a 450 helicopter build and are totally unused.		£59.50 for all four with fittings & horns

Payment type			* (Orders paid with PAYPAL will have 3% credit charge applied)
Your Email address			* (This will be used to identify returning regular customers for discounts)
Your full delivery address			*
Comments
Your helicopters			(Multi choice - Optional)
Your Forum handle			(Optional)

Thanks for ordering from Chopperaddict, by doing so you are helping to support this web site
and to other RC helicopter pilots no matter what level they may be.

To allow me to keep my prices as low as possible,
PLEASE NOTE THAT I CAN ONLY ACCEPT ORDERS FOR £30 or more,
unless it is a single item of £27 or more
so please check your order value before clicking the SUBMIT button

Regular customers are eligible for 5% discount on all subsequent orders valued over £50
You will need to use the same email address each time to qualify.

Chopperaddict does not provide a real time shopping cart. Once your order is received, you will receive a confirmation invoice, usually by return, but certainly within 24 hours.

If you have chosen to use PayPal to make payment, you will receive a special PayPal invoice listing all items ordered which lets you click a "Pay" button to pay for the goods you have ordered.

If you have chosen to use the Bank Transfer, you will receive a detailed invoice that will include our bank account details.

We are sorry, but we only accept Direct Bank Transfer or you can use PAYPAL to pay by CC or from your PAYPAL account, or of course, cash. Cheques will have to be cleared before goods are shipped.

All items will be despatched as soon as possible when in stock. Items not in stock will be shipped ASAP.

IMPORTANT : If you have items that you need to order on a regular basis, please let me know & I will try to stock them for you.

Please note that Post & Packaging will be added to all orders,
and a signature will be required for the goods on delivery.

THIS SITE IS TOTALLY NON COMMERCIAL AND IS FUNDED BY DONATIONS OF ALL TYPES FROM OTHERS IN THE RC HELICOPTER FRATERNITY. MY THANKS GO OUT TO ALL WHO CONTRIBUTE WITH IDEAS, INFORMATION, HELI PARTS OR EVEN CASH DONATIONS TO HELP WITH THE COSTS OF HOSTING THE SITE

OUR COMMERCIAL SPONSORS

NetCPlus Internet Solutions, Inc
Helping with the cost
of hosting this web site